| Motherboard |
Super X10SLM-F |
| Processor/Cache |
|
| CPU |
Intelฎ Xeonฎ processor E3-1200 v3 family, 4th Gen Core i3, Pentium, Celeron processors
Socket H3 (LGA 1150) |
| System Memory |
|
| Memory Capacity |
4x 240-pin DDR3 DIMM sockets
Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM) |
| Memory Type |
1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes |
8GB, 4GB, 2GB, 1GB |
| Memory Voltage |
1.5 V |
| Error Detection |
Corrects single-bit errors
Detects double-bit errors (using ECC memory) |
| On-Board Devices |
|
| Chipset |
Intelฎ C224 Express PCH |
| SATA |
SATA3 (6Gbps) w/ RAID 0, 1, 10, 5
SATA2 (3Gbps) w/ RAID 0, 1 |
| IPMI |
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Aspeed AST2400 BMC with 10/100/1000Mbps |
| Network Controllers |
Intelฎ i217LM + Intelฎ i210AT Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI) |
| VGA |
Aspeed AST2400 BMC |
| Input / Output |
|
| Serial ATA |
4x SATA3 (6Gbps) ports
2x SATA2 (3Gbps) ports
SATA DOM Power Connector |
| LAN |
2x RJ45 LAN ports
1x RJ45 Dedicated IPMI LAN port |
| USB |
4x USB 3.0 ports (1 Type-A, 2+1 via header)
6x USB 2.0 ports (4 rear, 2 via header) |
| VGA |
1x VGA port |
| Serial Port / Header |
1x Fast UART 16550 serial port
1x internal header |
| PC Health Monitoring |
Voltage
Monitors for CPU Cores, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages
5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN |
Total of five 4-pin fan headers supporting up to 5 fans
5x fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Support 3-pin fans (w/o speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors |
| Temperature Monitoring for CPU and chassis environment |
CPU thermal trip support
FC temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI |
| LED |
CPU / System Overheat LED
+5V Standby alert LED |
| Other Features |
Chassis intrusion detection
Chassis intrusion header |
| Chassis |
|
| Form Factor |
1U Rackmount |
| Model |
CSE-813MTQ-350CB |
| Dimensions |
Height: 1.7" (43mm)
Width: 17.2" (437mm)
Depth: 19.8" (503mm) |
| Weight |
Gross Weight: 30.4 lbs (13.8 kg)
Net Weight: 17.6 lbs (8 kg) |
| Available Colors |
Black |
| Front Panel |
|
| Buttons |
Power On/Off button
System Reset button |
| LEDs |
Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED |
| Ports |
2x USB ports
1x Serial COM Port |
| Expansion Slots |
|
| PCI-Express |
1x PCI-E 3.0 x8 (in x16) Full-height slot* |
| Drive Bays |
|
| Hot-swap |
4x 3.5" Hot-swap SATA3 HDDs w/ RAID |
| Peripheral Bay |
Slim optical drive (optional) |
| Backplane |
SAS2/SATA3 HDD Backplane
(SAS support requires optional SAS controller) |
| System Cooling |
Fans
4x 4cm 12,500 RPM PWM fans
Optional fans to cool add-on cards |
| Power Supply |
350W AC power supply w/ PFC
AC Voltage: 100-240 V, 50-60 Hz, 4.2-1.8 Amp
+5V: 18 Amp
+5V standby: 3 Amp
+12V: 29 Amp
+3.3V: 15 Amp |
| Certification |
80 Plus Gold Certified |
| System BIOS |
|
| BIOS Type |
128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features |
DMI 2.3
PCI 2.3
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3 |
| Management |
|
| Software |
IPMI (Intelligent Platform Management Interface) v2.0 with KVM support
SuperDoctorฎ III
Watch Dog
NMI |
| Power Configurations |
ACPI / ACPM Power Management
Main Switch Override Mechanism
Power-on mode for AC power recovery
Internal/External modem ring-on |
| Operating Environment / Compliance |
|
| RoHS |
RoHS2 (2011/65/EU) Compliant |
| Environmental Spec. |
Operating Temperature: 10ฐC to 35ฐC (50ฐF to 95ฐF)
Non-operating Temperature: -40ฐC to 70ฐC (-40ฐF to 158ฐF)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing) |
Australia Japan China Taiwan Brazil
